Safelite 6.0 Practice Test

These questions are part of the practice quiz. Start practicing

• Which of the following describes a likely incentive provided by insurance for windshield replacement?
• What is the first step in preparing bare metal between 1 and 24 inches?
• How does Safelite ensure compliance with safety regulations?
• Aktivator 100 is specifically designed to be used on which vehicle?
• What is the likely outcome if contaminants are not removed from the pinchweld?
• What is the flash-off time for Aktivator Pro above 15 degrees?
• What is the flash off time for Aktivator Pro on encapsulation above 15 degrees?
• What is the best way to avoid corrosion on an aluminum pinchweld?
• Which product is applied inside and out on a windshield during preparation?
• What steps should be taken if a customer notices a chip in their windshield?
• What color generally indicates the presence of galvanic corrosion?
• What is the first step in performing the full cut method?
• How long should you leave the contents of the metal cleaner prep stick on the pinchweld?
• What type of warranty does Safelite typically offer on their windshield installations?
• What role does SP-207 play in the preparation process?
• What aesthetic factors should be considered in a windshield replacement?
• What is referred to as tack free/skin time?
• Which preparation step involves using SP-207?
• What is one reason why labor experience might matter in windshield replacement?
• What does minimum drive away strength refer to in adhesive application?
• When preparing a pinchweld with more than 24 square inches of rust, what is the recommended preparation method?
• What is the function of the rearview mirror in relation to the windshield?
• What type of bead is used with Safe 30?
• What is responsible for curing urethane?
• What is the primary role of customer service in Safelite's operations?
• What is the flash-off time for SP-207 when outside the bond area?
• How many times can you dip a dauber into a SP-207 can?
• Why is insurance coverage relevant to windshield replacement choices?
• What is the primary concern when using tempered glass for side and rear windows?
• What is the primary component of the metal cleaner prep stick?
• Which of the following is a requirement for lot number traceability in the windshield industry?
• What is the first step in the repair process for a chipped windshield?
• What should you use for preparation on bare metal or scratches less than a half an inch?
• Which factor is critical for ensuring the durability of the windshield installation?
• When should you mix products from different manufacturers?
• Why is the short cut method not recommended?
• How do customers typically schedule appointments with Safelite?
• How do seasonal changes affect windshield repair and replacement?
• Which preparation method is used for bare metal areas between 1/2 and 1 square inch?
• What are the steps to prepare a Frit/No Frit/Inner Frit windshield?
• What is the primary purpose of the frit band on a windshield?
• What is the main focus of preparing a glass part for installation?
• How do you prepare a glass PAAS windshield?
• What safety equipment should technicians use when replacing a windshield?
• What does PAAS stand for?
• Which step is NOT part of pinchweld preparation when rust is present?
• What is green strength in relation to urethane?
• What should you check before using any chemicals?
• What does "wet to the glass" refer to?
• How do you prepare the pinchweld after performing a full cut?
• What steps are included in the correct procedure for performing a windshield replacement?
• What is the purpose of the metal cleaner prep stick?
• Which step is involved in preparing an inner frit glass?
• What is the primary purpose of Safelite's automotive glass services?
• What is the appropriate decontamination process for a windshield?
• If the PAAS system is damaged, what can be done?
• What does firmly reaffixing the inner and outer cap extend?
• What protocols should be followed for handling hazardous materials in glass repair?
• In what scenarios is a full windshield replacement preferred over a repair?
• How is Sika Safe 30 best described?
• How long does the installation window last after using SP-207?
• Why should a round bead not be used in urethane application?
• What is the importance of securely fastening trim after windshield installation?
• Under which conditions should a full cut be performed?
• Which factor is least likely to influence the cost of windshield replacement?
• What is a necessary step in preparing an OEM pre-primed part?
• How long can Safe 30 be warmed for reuse?
• Why is it essential to ensure proper calibration of advanced driver assistance systems (ADAS) after windshield replacement?
• What does a vehicle’s UV filter in the windshield do?
• What does the PAAS System serve as?
• How should you prepare an FRP pinchweld?
• How long does it typically take for windshield adhesive to cure?
• What type of training is required for Safelite technicians?
• Which factor can affect the curing time of windshield adhesive?
• What should be done first when preparing a newly painted pinchweld?
• What is the flash off time for Aktivator 100 due to the porous nature of gaskets and trimmed urethane?
• Why is it not recommended to use a brush or dauber to apply Aktivator Pro?
• What role does customer feedback play in Safelite's service improvement?
• How often should a vehicle owner have their windshield inspected?
• What outside temperature range can Safe 30 be used in?
• When refinishing a pinchweld, at what point should a body shop stop?
• Who is responsible for treating Level 4 Rust?
• What is a common sign that a windshield needs immediate attention?
• What are key environmental considerations in automotive glass disposal?
• What is level 1 rust commonly referred to as?
• What is the second decision you ask yourself after the cut out?
• After cut out, what is the first question to ask yourself?
• What does SP-207 help with in the glass preparation process?
• What are the signs of a defective windshield installation?
• Which step in the glass preparation process is not required for all parts?
• What additional services does Safelite offer beyond glass repair?
• Which of the following is included in the preparation of a gasket set windshield with a frit?
• What environmental factor breaks down urethane?
• After removing the windshield, what is the correct sequence of steps to prepare the vehicle?
• What type of environment is preferred when performing adhesive applications?
• What is the purpose of the acoustic layer in some windshield designs?
• How is the height of the v bead determined?
• What is the open life for Aktivator 100, Aktivator Pro, and SP-207?
• What are the steps to prepare a gasket set windshield without a frit?
• Up to how many square inches can rust at levels 1-3 be treated?
• What is the preferred method to apply urethane?
• How does Safelite address language barriers in customer service?
• What is an equivalent to the OEM E-Coat?
• Why is it important to consider the make and model of a vehicle when replacing a windshield?
• What level of Rust includes deep pitting in its description?
• How long should you shake the SP-207 can after the ball rattles?
• What appearance characterizes Level 3 Rust?
• What product can be used to repair a lightly damaged ceramic frit?
• How can you determine if Aktivator Pro is no longer usable?
• When is it appropriate to apply urethane to the glass?
• Why is it essential for technicians to stay updated on industry trends?
• What technique is used to perform a wet scrub on a windshield?
• What does FRP stand for in the context of materials used for pinchweld preparation?
• What is a common effect of having chips and cracks in a windshield?
• When using Aktivator Pro and SP-207, how should the adhesive be wiped on the glass?
• How can you determine if SP-207 is no longer usable?
• What is the proper procedure for preparing a pinchweld after complete adhesive removal?
• What is the maximum area of bare metal that can be treated?
• What is the most immediate action a customer should take after experiencing a windshield crack?
• What tools are commonly used in the process of windshield replacement?
• During the pre-inspection, what else do we check besides damage to the vehicle?
• How many layers of SP-207 are applied to an aluminum pinchweld?
• During the preparation of a part, what process is performed after rinsing?
• Aktivator 100 can be used down to what temperature?
• What is involved in complete adhesive removal?
• What is the primary function of the SP-207 product?
• What factors are known to influence the cost of windshield replacement?
• What can partially used unipacs be utilized for?
• Once Aktivator Pro is applied, how long is it active?
• Why is it essential to understand chemical exposure routes?
• What is Level 2 Rust commonly referred to as?
• What should be used to wipe off the contents of the metal cleaner prep stick?
• What should customers know about the repair process duration?
• What type of training do technicians receive regarding customer interactions?
• How can you physically check if SP-207 is dry?
• What action must be taken for a part that shows signs of heavy contamination?
• How are modern windshields designed to absorb impact?
• What safety standards does Safelite adhere to for glass replacement?
• How many times can a part be activated using Aktivator Pro?
• How should clear glass be prepared before installation?
• What is the definition of galvanic corrosion?
• What does the term "open time" refer to?
• What is the tack free time for urethane?
• What is the purpose of a windshield's built-in tint band?
• How long do you shake a Primer Stix before use?
• When should a vehicle’s rearview mirror be replaced?
• When should contaminants be removed from the pinchweld?
• After decontaminating, what is the next step if contamination is still present?
• What is the maximum surface temperature Safe 30 can be applied to?
• Which of the following is NOT part of the preparation for a pinchweld?
• Which of the following is a common sign indicating the need for windshield repair?
• What product is used after scuffing an aluminum pinchweld?
• What is the flash-off time for Aktivator Pro below 15 degrees?
• How does glass thickness vary among different vehicle models?
• What is the first step in preparing a metal framed part?
• Where can you typically find expiration dates for products?
• What elements must be removed for proper windshield replacement?
• What is the first step in preparing an aluminum pinchweld with removed paint or rust?
• How can you determine if a windshield is contaminated?
• What is a common misconception about windshield repair?
• What is the minimum safe drive away time (MDAT) for Safe 30 in very hot, dry climates?
• How many times can you prime a glass with SP-207?
• What characteristic does level 1 rust typically exhibit?
• What is the maximum time you have to install or retreat the glass after priming with SP-207?
• How can customers contact Safelite for support?
• Which materials are commonly used in automotive glass?
• How can road conditions impact glass repair procedures?
• What is SP-207 primarily used for?
• How is modular windshield assembly different from traditional methods?
• What materials are needed when preparing a pinchweld with less than 24 square inches of rust?
• What should customers avoid doing after a windshield replacement to ensure proper bonding?
• How does glass type impact windshield replacement?
• What does galvanic corrosion typically appear as?
• Before starting an adhesive application, what is crucial to consider about the surface?
• If there is a discrepancy between the training manual and the product manufacturer's manual, which should you follow?
• What should you do after a part has been activated the maximum number of times?
• Which aspect of windshield replacement is influenced by labor costs?
• What methods are commonly used to ensure the quality of repaired glass?
• Under what condition can a remove and replace be performed?
• What is the primary purpose of scuffing the pinchweld?
• What is an acceptable bonding surface after repairing a pinchweld?
• What are some common causes of windshield damage?
• What does the "DOT" number on automotive glass signify?
• What follows cleaning an aluminum pinchweld with glass cleaner?
• What might be a visual indication that a windshield needs repair?
• How do chemicals primarily enter the body during adhesive application?
• What are the steps to prepare an encapsulated windshield?
• How does moisture affect windshield adhesives?
• At what degree does the flash-off time change for Aktivator Pro?
• What should you do if signs of rust are found during the pre-inspection?
• What should be done to any part that does not meet the Safelite quality standard?
• What is the importance of following the manufacturer's specifications for windshield adhesive?
• When using SP-207 to prime bare metal scratches, what should you ensure?
• What preparatory step follows the decontamination of a windshield before installation?
• What effect does high temperature and high humidity have on open time and tack free time?
• What is the flash-off time for SP-207 at all temperatures?
• How is Level 4 Rust defined?
• Why is it important to check the operation of features related to the windshield during pre-inspection?
• What is the purpose of a laminated glass in automotive applications?
• What advantages does mobile service offer to Safelite customers?
• What is the required preparation step for an encapsulated back glass?
• What should be done immediately after contamination has been removed from a part?
• What role does glass cleaner play in the urethane application process?
• What is the flash off time for Aktivator Pro on a gasket?
• Why is tapping the adhesive bead important during installation?
• What is the primary purpose of the visual inspection in windshield repair?
• What does proper surface preparation prevent in windshield installations?
• How long does open time typically last in cold weather?
• What is the purpose of using Aktivator Pro?
• What color scotchbrite pad is used to scuff the pinchweld?
• What should a technician do before starting a windshield replacement?
• Why is it important to document the vehicle condition before service?
• What is the standard open time for urethane application?
• What impact does a crack longer than six inches have on a windshield's integrity?
• What step is commonly included in the preparation of a pinchweld that has received adhesive?
• Which organization requires that lot numbers be traceable to every work order?
• For proper bonding between the glass, urethane, and body, what must be done?
• What is the recommended cleaning agent for preparing any pinchweld surface?
• How can chip repairs be performed without replacing the glass?
• What temperature range is optimal for storing or applying Safe 30?